46
The front wall can then be removed and put to the side.
Inside the box, the tug is secured with several straps. First
loosen and remove the straps on the front side.
Make sure that after removing the front strap, the xing piece
is removed.
Now you can also loosen and remove the rear straps.
For reasons of transport safety, the caps of the battery
disconnect switches are removed. To be able to start the
tug, attach both caps to the battery disconnectors. Then pull
them both up to activate the tug.
Then position the lid of the transport box at the front part of
the box so that the lid serves as a ramp. The tug can then be
carefully and slowly manoeuvred out of the transport box. If
possible try to only to drive straight until the unit has left the
box.
To Next Page
Loading...