To Next PageTo Next Page
Need help?Do you have a question about the Toyota 02-8FGF18 and is the answer not in the manual?
Read manual, understand vehicle, learn safe driving points, perform checks.
Explains the active mast front tilt angle control for automatic adjustment.
Explains the Operator Presence Sensing system and its safety functions.
Introduces Auto Speed Control for limiting speed based on load.
Explains sensors preventing sudden acceleration based on load.
Advises reading and maintaining caution plates on the vehicle.
Explains signal words, colors, pictographs, and text in warning labels.
Identifies and labels the driving controls and instrument panel.
Details the combination meter, its gauges, and warning lamps.
Explains the diagnosis lamp and error code display.
Introduces the multifunction display and its components.
Explains how to use the load meter and its error display.
Explains the diagnosis indicator for system abnormalities.
Indicates when the low speed setting is active.
Indicates when auto speed control functions are active.
Indicates when speed limit functions are active or deactivated.
Explains the over-speed alarm function for DX models.
Explains how to set low speed limits.
Explains how to set the speed for the over-speed alarm.
Explains the functions and safety precautions for the ignition switch.
Explains the dual-function switch for lights and turn signals.
Explains the control lever for forward/reverse shifting and safety notes.
Explains the operation of the lift lever for raising/lowering forks.
Explains the tilt lever for mast forward/backward movement.
Explains the automatic forks leveling control feature.
Explains the mini lever control for forward/reverse travel.
Explains the mini lever lift lever for fork operation.
Explains the tilt lever for mast forward/backward movement.
Explains the automatic fork leveling switch.
Explains automatic leveling when tilting forks forward.
Explains automatic leveling when tilting forks backward.
Explains the forks automatic leveling switch.
Explains the load meter display for weight indication.
Explains arm rest adjustment for mini/joy stick models.
Explains arm rest adjustment for premium cabin models.
Explains how to engage and disengage the parking brake pedal.
Explains seat safety features and warnings about operator presence.
Explains the restraint system including seat belt usage.
Explains how to fasten, use, and disconnect the seat belt.
Explains how to fasten and disconnect a retractable seat belt.
Introduces the Toyota Diesel Particulate Filter system.
Explains the DPF-II system regeneration method.
Details the step-by-step procedure for DPF regeneration.
Lists pre-operation checks and weekly inspections.
Details checking and supplying engine coolant level.
Explains how to check the hydraulic oil level.
Explains procedures for inspecting engine oil level.
Explains how to inspect the brake fluid level.
Explains how to inspect the brake pedal condition.
Explains how to inspect the engine, exhaust, and carburetor.
Lists specific items for weekly (40-hour) inspection.
Explains the step-by-step procedure for changing tires.
Provides a chart for lubrication points and service intervals.
Lists inspection intervals for daily, weekly, and longer periods.
Provides a table for periodic replacement of parts.
Provides a detailed table for periodic inspections and actions.
Lists critical safety precautions for operating LPG forklifts.
Provides inspection and servicing guidelines for LPG forklifts.
Provides engine specifications for different models.
Lists adjustment values for various items across models.
Explains the engine cut-off timer and its functions.
Explains the TWIS system and its safety precautions.
Explains how to start the truck using the ignition and PIN code.
Explains the Automatic Lift Control system and its principle.
General