4Runner_Navi_U (L/O 0208)
15
2003 MY 4Runner Navigation from Aug. ’02 Prod. (OM35799U)
There are 3 ways to select a point of
interest location.
(a) Input the name directly
(b) Selecting a city to search
(c) Selecting from the categories
It will not take a long time for you to
find your destination if you use a com-
bination of the searching ways of (a),
(b) and (c).
Touch the
“POI” switch on the “Des-
tination” screen.
L00027
The “POI” screen appears, and then you
can input the name of the point of inter-
est.
Touch letters directly on the screen to
input a name. When you input numerals,
touch the
“0–9” switch to display the
screen for numeral input.
If the number of sites becomes 4 or less,
or if you touch the
“List” switch at the
bottom right of the screen, the screen
changes and displays a list of sites.
L00028
Touch the of your desired destina-
tion. The screen changes and displays
the map location of the selected des-
tination and the route preference. (See
“(a) Entering destination” on page 26.)
If the same name exists in more than
one city, you can search it more easily
with the
“City” and “Category”
switch. (See “(b) Selecting a city to
search” and “(c) Selecting from the cate-
gories”.)
Destination input by POI (a) Input the name directly
To Next Page
Loading...
