What to do if the engine does not respond to the accelerator pedal on Toyota 8FDU18?
If your Toyota Forklifts engine isn't responding when you press the accelerator pedal, the issue might stem from the injection pump. Try servicing or replacing the injection pump to resolve this.
Why does the idle speed deviate from the specified value in Toyota 8FDU18?
If your Toyota Forklifts idle speed is off, it might be the injection pump. Try adjusting the idle set screw to fix it.
What to do if the idle up speed does not rise on Toyota 8FDU18?
If the idle up speed on your Toyota Forklifts isn't increasing, the problem might be with the injection pump. Addressing this involves servicing the injection pump, which may include applying grease, etc.
How to fix the idle switch open error on Toyota 8FDU18?
If you're getting an idle switch open error on your Toyota Forklifts, it might be related to the injection pump. Replacing the return spring might solve the problem.
General| Model | 8FDU18 |
|---|---|
| Power Source | Diesel |
| Mast Type | 2-Stage |
| Engine | Diesel |
| Transmission | Automatic |
| Tire Type | Pneumatic |
| Category | Forklifts |
| Load Capacity | 1800 kg |
| Lift Height | 3000 mm |
| Overall Width | 1150 mm |
| Turning Radius | 2170 mm |
| Engine Model | 1DZ |
To Next Page
