531
5-6. Using Bluetooth
®
devices
5
Audio system
C-HR_OM_Europe_OM10528E
Registering a Bluetooth
®
device
Press the “SETUP” button (Type A), or tune/scroll knob (Type B)
and select “Bluetooth
*” using the knob.
Press the knob and select “Pairing” using the knob.
A passkey will be displayed.
SSP (Secure Simple Pairing) incompatible Bluetooth
®
devices:
Input the passkey into the device.
SSP (Secure Simple Pairing) compatible Bluetooth
®
devices:
Select “Yes” to register the device. Depending on the type of
device, it may register automatically.
If a Bluetooth
®
device has both music player and cellular phone func-
tions, both functions will be registered at the same time. When delet-
ing the device, both functions will be deleted at the same time.
If the off-hook switch is pressed and the “PHONE” or “TEL” mode is
entered when no phones have been registered, the registration
screen will be automatically displayed.
*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Before using the Bluetooth
®
audio/phone, it is necessary to reg-
ister a Bluetooth
®
device in the system. Follow the procedure
below to register (pair) a device:
How to register a Bluetooth
®
device
1
2
3
To Next Page
Loading...
