99
2. Instrument cluster
2
Instrument cluster
HIGHLANDER_U (OM0E017U)
Select using the meter control switches.
Select an item and then set it with the center button.
■ LDA (Lane Departure Alert with steering control) settings
→P. 6 83
■ PCS (Pre-Collision System) settings
→P. 6 83
■ BSM (Blind Spot Monitor) settings (if equipped)
Select to activate/deactivate the BSM (Blind Spot Monitor).
(→P. 684)
■ Power mode (driving mode) settings (if equipped)
Select to activate/deactivate the power mode. (→P. 684)
■ Stop & Start system settings (if equipped)
The length of time the Stop & Start system will operate when the “A/
C” switch of the air conditioning system is on can be set to 2 differ-
ent levels. (→P. 684)
■ Meter settings
● Language
Select to change the language on the display.
● Units
Select to change the unit of measure for fuel consumption.
● Maintenance system (for U.S.A.)
Select to reset the maintenance data after the required mainte-
nance is performed. (
→P. 508)
● Eco Driving Indicator Light
Select to activate/deactivate the Eco Driving Indicator Light.
(
→P. 102)
● switch settings
You can register 1 screen as the top screen. To register, press
and hold while the desired screen is displayed.
● Drive information 1 through 3
Select to select up to 2 items that will be displayed on a Drive
information screen, up to 3 Drive information screens can be set.
Settings display
1
2
To Next Page
Loading...
