70
2-1. Instrument cluster
Press to enable/disable the Road
Sign Assist.
• RSA (Road Sign Assist) on/off
Select to enable/disable the Road Sign
Assist.
Press and hold to change the set-
tings of the following items:
• “Notification Method”
Select to change each notification
method used to notify the driver when
the system recognizes excess speed.
• “Notification Level”
Select to change each notification level
used to notify the driver when the sys-
tem recognizes a speed limit sign.
■
Vehicle settings
Press and hold to change the
settings of the following items:
(Stop & Start) (P.219)
Select to set the length of time the Stop
& Start system will operate when the
“A/C” switch of the air conditioning sys-
tem is on.
■
Meter settings
Press and hold to change the
settings of the following items:
Language
Select to change the language dis-
played.
Units
Select to change the units of measure
displayed.
Eco Driving Indicator Light
(P. 66)
Select to enable/disable the Eco Driv-
ing Indicator Light.
Fuel economy display
Select to change the average fuel con-
sumption display between after
start/after reset. (P.65)
Select to display/not display the audio
system linked display.
Select to change the displayed content
of the following:
• Display contents
Select to display/not display the AWD
control (if equipped). (P. 6 8 )
• Drive information type
Select to change the drive information
type display between after start/after
reset.
• Drive information items
Select to set the first and second items
of the drive information display to any of
the following: average vehicle
speed/distance/elapsed time.
Pop-up display
Select to enable/disable pop-up dis-
plays for each relevant system.
Multi-information display off
Displays a blank screen.
Default setting
Select to reset the meter display set-
tings to the default setting.
■
Vehicle functions and settings
that can be changed
P.396
To Next Page
Loading...
