What to do if my Toyota Car Video System power does not turn on?
If your Toyota Car Video System does not turn on, and no sound is produced, there are a couple of potential reasons. First, the fuse may be blown. If this is the case, replace it with a fuse of the same amperage. If the fuse blows again after replacement, it could indicate a more serious issue. Another potential cause is incorrect wiring.
Why does the sound skip or become noisy on my Toyota PX-4226A-C?
If the sound skips or is noisy on your Toyota Car Video System, it is likely that the audio files are not encoded properly. Try using correctly encoded audio files.
What to do if Toyota Car Video System cannot receive and make calls after being paired?
If your Toyota Car Video System is unable to receive and make calls after being paired, it could be due to a few reasons. The Bluetooth connection might not be fully established yet. It typically takes a few seconds after pairing for the connection to establish. If it doesn't connect automatically, try connecting manually through your device or by entering Bluetooth Handsfree mode and reconnecting to the last connected device. Alternatively, power off the unit, delete it from Bluetooth Handsfree mode, and pair the device again. If the problem still persists, try turning off the power on the device and perform a new pairing operation.
Why are Miracast images not displayed on my Toyota PX-4226A-C Car Video System?
If Miracast images are not displayed on your Toyota Car Video System, the parking brake may not be engaged. Check that the parking brake is engaged.
Why can't I perform Bluetooth Audio connection on my Toyota PX-4226A-C Car Video System?
If you cannot perform a Bluetooth Audio connection on your Toyota Car Video System, it may be because some smartphones do not support both USB and Bluetooth connections simultaneously. Try unplugging the USB connection and then attempt to reconnect the Bluetooth Audio.
How to fix a dark display on my Toyota PX-4226A-C Car Video System?
If the display on your Toyota Car Video System is dark, it could be due to a couple of reasons. First, the Brightness control might be set too low. Adjust the Brightness to a higher level. Second, if the vehicle's headlights are on, the display automatically dims to prevent glare, especially at night. If this happens during the daytime, adjust the Brightness properly.
Why is the image not displayed on my Toyota Car Video System?
If the image is not displayed on your Toyota Car Video System, it may be because the parking brake is not engaged. Check that the parking brake is engaged.
Why are video images not displayed on my Toyota Car Video System?
If video images are not displayed on your Toyota Car Video System, the parking brake might not be engaged. Ensure that the parking brake is engaged.
Why can't I make calls even though Bluetooth is connected on my Toyota PX-4226A-C Car Video System?
If your Bluetooth is connected but you are unable to make calls on your Toyota Car Video System, the Handsfree Profile (HFP) may not be connected. Ensure that HFP is connected by checking the display indication. If allowed, connect HFP from the device; otherwise, try disconnecting and reconnecting the device again.
Why is my USB device not being recognized by my Toyota Car Video System?
If your USB device or cable is not being recognized by your Toyota Car Video System, it might be damaged. Try disconnecting and reconnecting the USB device. If the device is still not recognized after reconnecting, try replacing it with a different USB device. Also, the USB device or cable might be loose.
General| Brand | Toyota |
|---|---|
| Model | PX-4226A-C |
| Category | Car Video System |
| Language | English |
To Next Page