30
FEATURES & OPERATIONS
Rear view monitor system
The rear view monitor system displays an image of the view from the bumper of
the rear area of the vehicle. The camera for the rear view monitor system is located
above the license plate.
To adjust the image on the rear view monitor screen, press the “MENU” button and
select “Display.” Select “Camera” to adjust the screen contrast and brightness.
Refer to the Owner‘s Manual for limitations and more details on this system.
The Bird’s Eye View Camera with Perimeter Scan function assists the driver in
viewing the surroundings, when operating at low speeds or parking, by combining
front, side and rear cameras and displaying an overhead image on the screen.
To display the moving view/see-through view screen, press the camera switch when
the shift lever is in the “P” position and the intuitive parking assist is enabled.
Refer to the Owner‘s Manual for limitations and more details on this system before
attempting to use it.
Moving view See-through view
Body color setting switch Body color setting switch
Display mode change switch Display mode change switch
Rotation pause switch Rotation pause switch
Bird’s Eye View Camera with
Perimeter Scan
(if equipped)
To Next Page
Loading...
