31
OVERVIEWFEATURES & OPERATIONSTOYOTA SAFETY SENSESAFETY & EMERGENCY FEATURES
The Blind Spot Monitor is a system that has two functions:
• The Blind Spot Monitor function (assists the driver in making the decision when
changing lanes)
• The Rear Cross Traffic Alert function (assists the driver when backing up)
The system is designed to use radar sensors to detect vehicles traveling in the
RAV4’s blind spot. If a vehicle is detected, the driver will be alerted via the outside
rear view side mirror indicators.
Rear Cross Traffic Alert function:
While in reverse, when a vehicle approaching from the right or left rear of the RAV4
is detected, the outside rear view mirror indicators will flash. Also, the RCTA icon
for the detected side will be displayed on the audio system display, and the RCTA
buzzer will sound.
Blind Spot Monitor with Rear Cross
Traffic Alert (BSM w/RCTA)
(if equipped)
Buzzer*
* RCTA only
Multi-information
display
Indicators
Monitor screen
display*
Indicator
Indicator
(1) Press “ ” switches and select “ ” from the Multi-Information Display (MID).
(2) Press “
” switches and select “ ” or “RCTA” then press “ .” The setting
screen is displayed.
(3) Press “
” switches and select the “On/Off” setting function and then press
“
.”
(4) Press “
” to go back to the menu.
The BSM function and the RCTA function are automatically enabled each time the
power switch is turned on.
Refer to the Owner’s Manual for limitations and more details on this system before
attempting to use it.
SYSTEM ON/OFF
To Next Page
Loading...
