32
FEATURES & OPERATIONS
(1) Press “ ” switches and select “ ” from the Multi-Information Display (MID).
(2) Press “
” switches and select “ ” and then press “ .” The setting
screen is displayed.
(3) Press “
” switches and press “ ” to select the desired setting.
(4) Press “
” to go back to the menu.
The system will continue in the last state it was in (ON or OFF) when the engine is
started again.
Refer to all of the section “Parking Support Brake function” (static objects and rear-
crossing vehicles) in the Owner’s Manual for limitations and more details.
When traveling at a low
speed and the brake
pedal is not depressed,
or is depressed late.
When the accelerator
pedal is depressed
excessively.
When the vehicle moves in
the unintended direction
due to the wrong shift
position being selected.
When reversing, a vehicle is
approaching and the brake pedal is
not depressed, or is depressed late.
The Front and Rear Parking Assist with Automated Braking consists of the following
functions that operate when driving at a low speed or backing up, such as when
parking. When the system determines that the possibility of a collision with a
detected object is high, a warning operates to urge the driver to take evasive
action. If the system determines that the possibility of a collision with a detected
object is extremely high, the brakes are automatically applied to help avoid the
collision or help reduce the impact of the collision.
For the static object
For the rear-crossing vehicles (if equipped)
CHANGE SETTINGS
FUNCTIONS
Front and Rear Parking Assist with
Automated Braking (PA w/AB) (if equipped)
To Next Page
Loading...
