127
2
2-2. Charging
Plug-in hybrid system
■ Charging from an external
power source (P.135)
This is a charging method used
when charging from an AC socket
(220 V - 240 V) with the AC
charging cable equipped to the
vehicle or charging at a public
charging station.
The charging start time (or departure
time) and day can be set to carry out
charging using the charging schedule
at the desired date and time. (P.144)
■ Using the hybrid battery (trac-
tion battery) charge mode
(P.87)
The plug-in hybrid system can be
switched to hybrid battery (traction
battery) charge mode to charge the
hybrid battery (traction battery)
using electricity generated by gaso-
line engine operation.
The maximum charge amount in the
hybrid battery (traction battery) charge
mode is approximately 80% of the fully
charged capacity for the charging from
an external power source.
This vehicle is equipped with sev-
eral functions that are linked with
● Do not connect to a branch electri-
cal socket.
● Make sure to connect the charging
connector and AC charging inlet
directly. Do not connect a convert-
ing adaptor or extension cord
between the charging connector
and AC charging inlet.
Charging methods
The following methods can be
used to charge the hybrid bat-
tery (traction battery).
Types of charging methods
Charging-linked functions
To Next Page
Loading...
