135
2
2-2. Charging
Plug-in hybrid system
■ Charging electricity
This vehicle can be charged up to
approximately 3.5 kW or 7 kW
*
.
However, depending on the used char-
ger or AC charging cable, charging elec-
tricity may be limited.
*
: Vehicles with 7 kW onboard traction
battery charger only
How to charge
This section explains the pro-
cedure for charging the hybrid
battery (traction battery) with
the equipped AC charging
cable.
When using a charging station,
make sure to check the opera-
tion instructions of the AC
charger.
When the charging schedule is
registered, make sure “Charge
Now” is turned on before
charging. (P.150, 156, 162)
■ When using the AC charging
cable and related parts
To prevent damage to the AC
charging cable and related parts,
observe the following precautions.
● When interrupting or canceling
charging, remove the charging con-
nector before removing the plug.
● When removing the AC charging
cable, check that the charging con-
nector is unlocked.
● Do not forcefully pull the charging
connector cap and AC charging
inlet cap.
● Do not apply a vibration to the
charging connector while charging.
Charging may be stopped.
● Do not insert anything but the
charging connector into the AC
charging inlet.
● When inserting the plug into or
removing the plug from the socket,
make sure to hold the body of the
plug.
To Next Page
Loading...
