268
4-4. Adjusting the steering wheel and mirrors
*
: If equipped
Icon display area
Displays icons, adjusting gauge, etc.
(P.270)
Lever
Operate to change between digital mir-
ror mode and optical mirror mode.
Menu button
Press to display the icon display area
and select the item you want to adjust.
Select/adjust button
Press to change the setting of the item
you want to adjust.
Camera indicator
Indicates that the camera is operating
normally.
Operate the lever to change
between digital mirror mode and
optical mirror mode.
Digital Rear-view Mirror
*
The Digital Rear-view Mirror is
a system that uses the camera
on the rear of the vehicle and
displays its image on the dis-
play of the Digital Rear-view
Mirror.
The Digital Rear-view Mirror
can be changed between opti-
cal mirror mode and digital
mirror mode by operating the
lever.
The Digital Rear-view Mirror
allows the driver to see the
rear view despite obstructions,
such as the head restraints or
luggage, ensuring rear visibil-
ity. Also, the rear seats are not
displayed and privacy of the
passengers is enhanced.
Observe the following precautions.
Failure to do so may result in death or
serious injury.
■ Before using the Digital Rear-
view Mirror
● Make sure to adjust the mirror
before driving. (P.270)
• Change to optical mirror mode and
adjust the position of the Digital
Rear-view Mirror so that the area
behind your vehicle can be viewed
properly.
• Change to digital mirror mode and
adjust the display settings.
● As the range of the image displayed
by the Digital Rear-view Mirror is
different from that of the optical mir-
ror, make sure to check this differ-
ence before driving.
System components
Changing modes
A
B
D
E
To Next Page
Loading...
