326
5-3. Operating the lights and wipers
5-3.Oper ating the lights and wipers
Operating the switch turns
on the lights as follows:
1 The front position, tail,
license plate and instrument
panel lights turn on.
2 The headlights and all lights
listed above turn on.
3 The headlights, daytime
running lights (P.326) and all
the lights listed above turn on
and off automatically.
■ AUTO mode can be used when
The power switch is in ON.
■ Daytime running light system
To make your vehicle more visible to
other drivers during daytime driving, the
daytime running lights turn on automati-
cally whenever the hybrid system is
started and the parking brake is
released with the headlight switch in the
position. (Illuminate brighter than
the front position lights.) Daytime run-
ning lights are not designed for use at
night.
■ Headlight control sensor
The sensor may not function properly if
an object is placed on the sensor, or
anything that blocks the sensor is
affixed to the windshield. Doing so inter-
feres with the sensor detecting the level
of ambient light and may cause the
automatic headlight system to malfunc-
tion.
■ Automatic light off system
● When the light switch is in or
position: The headlights and front fog
lights turn off after the power switch is
turned to ACC or OFF.
● When the light switch is in posi-
tion: The headlights and all lights turn
off after the power switch is turned to
ACC or OFF.
To turn the lights on again, turn the
power switch to ON, or turn the light
switch to position once and then
back to or position.
■ Light reminder buzzer
A buzzer sounds when the driver’s door
is opened while the lights are turned on
with the power switch in ACC or OFF.
Headlight switch
The headlights can be oper-
ated manually or automati-
cally.
Turning on the headlights
To Next Page
Loading...
