508
7-3. Do-it-yourself maintenance
■ Windshield wiper blade
removal and installation
1 While holding the hook portion
of the wiper arm, first lift up
the driver side, and then lift up
the passenger side.
When returning the wiper arms to their
original positions, first lower the pas-
senger side, and then lower the driver
side.
2 Lift the stopper using a flat-head
screwdriver as shown in the
illustration.
To prevent damage to the wiper arm,
protect the tip of the screwdriver with a
rag.
3 Slide the wiper blade to remove
it from the wiper arm.
When installing, reverse the steps
listed.
■ Wiper insert replacement
1 Pull the wiper insert to remove
the claw of the wiper blade from
Wiper insert replace-
ment
When replacing the wiper
insert, perform the following
procedure to operate each
wiper.
Windshield wipers
To Next Page
Loading...
