477
7
7-3. Do-it-yourself maintenance
Maintenance and care
■ Front
■ After installing the support rod
into the slot
Make sure the rod supports the hood
securely from falling down on to your
head or body.
■ When closing the hood
When closing the hood, take extra
care to prevent your fingers etc. from
being caught.
■ When closing the hood
Be sure to return the support rod to its
clip before closing the hood. Closing
the hood without returning the support
rod properly could cause the hood to
bend.
Positioning a floor jack
When using a floor jack, follow
the instructions in the manual
provided with the jack and per-
form the operation safely.
When raising your vehicle with
a floor jack, position the jack
correctly.
Improper placement may dam-
age your vehicle or cause
injury.
Location of the jack point
To Next Page
Loading...
