328
5-3. Operating the lights and wipers
*
: If equipped
1 Press the Automatic High Beam
switch.
2 Turn the headlight switch to the
or position.
AHB (Automatic High
Beam)
*
The Automatic High Beam
uses an in-vehicle front cam-
era to assess the brightness of
streetlights, the lights of vehi-
cles ahead etc., and automati-
cally turns the high beams on
or off as necessary.
■ Limitations of the Automatic
High Beam
Do not overly rely on the Automatic
High Beam. Always drive safely, tak-
ing care to observe your surroundings
and turning the high beams on or off
manually if necessary.
■ To prevent incorrect operation of
the Automatic High Beam system
Do not overload the vehicle.
Activating the Automatic
High Beam system