142
2-2. Charging
If the charging connector is unlocked
during charging (while the charging
indicator is illuminated), charging will be
interrupted.
2 Make sure to hold the body of
the charging connector and pull
it towards you.
3 Attach the charging connector
cap.
4 Attach the AC charging inlet cap
and close the charging port lid.
Lock the doors to lock the charging port
lid. (P.121)
When using the Mode 2 AC
charging cable
5 Remove the plug from the
socket when the charging equip-
ment will not be used for a pro-
longed period of time.
Hold the body of the plug when remov-
ing.
Make sure to put the cable away imme-
diately after disconnecting. (P.143)
When leaving the plug inserted, inspect
the plug and connector once a month to
check if dirt or dust has accumulated.
When using the Mode 3 AC
charging cable (if equipped)
5 After removing the charging
plug from the charging device,
install the cap to the charging
plug.
Make sure to hold the body of the
charging plug when removing it.
Make sure to put the cable away imme-
diately after disconnecting. (P.143)
To Next Page
Loading...
