153
2
2-2. Charging
Plug-in hybrid system
When operating charging schedule,
use the meter control switches.
Meter control switches
(P.212)
Multi-information display
■ Registering the charging
schedule
1 Press and hold to display
the cursor on the content display
area (center) of the multi-infor-
mation display.
2 Press or of the meter
control switches to select
and then press .
3 Press or of the meter
control switches and select
“ Vehicle Settings”. Then
press and hold .
4 Press or of the meter
control switches to select
“Charging Settings”, and then
press .
The “Charging Settings” screen will be
displayed.
5 Press or of the meter
control switches to select
“Charging Schedule”, and then
press .
The “Charging Schedule” screen will be
displayed.
6 Press or of the meter
control switches to select
“Scheduled Events”, and then
press .
The “Scheduled Events” screen will be
■ Cautions while performing the
setting operation
When performing the setting opera-
tion while the hybrid system is oper-
ated, ensure that the vehicle is parked
in a place with adequate ventilation.
In a closed area such as a garage,
exhaust gases including harmful car-
bon monoxide (CO) may collect and
enter the vehicle. This may lead to
death or a serious health hazard.
■ While performing the setting
operation
When performing the setting opera-
tion while the hybrid system is
stopped, be careful that the 12-volt
battery will not be discharged.
Setting operations on 12.3-
inch multi-information dis-
play (if equipped)
B
To Next Page
Loading...
