200
3-1. Instrument cluster
Information display area
A variety of information can be dis-
played by selecting a menu icon.
Additionally, warning or sugges-
tion/advice pop-up displays will be dis-
played in some situations.
Menu icons (P.200)
■ The multi-information display is
displayed when
The power switch is in ON.
■ When changing driving mode
● Background color of the multi-informa-
tion display is changed following the
selected driving mode. (P.411)
● Background color of the multi-informa-
tion display is changed following the
selected driving mode or when Trail
Mode is turned on. (P.411, 413)
■ Liquid crystal display
Small spots or light spots may appear
on the display. This phenomenon is
characteristic of liquid crystal displays,
and there is no problem continuing to
use the display.
The multi-information display is
operated using the meter control
switches.
Scroll the screen
*
/switch the dis-
play
*
/move the cursor
Press: Enter/Set
Press and hold: Reset/Display
customizable items
Return to the previous screen
Call sending/receiving and his-
tory display (if equipped)
Linked with the hands-free sys-
tem, sending or receiving call is
displayed. For details regarding
the hands-free system, refer to
“Multimedia owner’s Manual”.
*
: On screens where the screen can be
scrolled and the display can be
switched, a scroll bar or a round icon
that shows the number of registered
screens is displayed.
Information related to each icon
can be displayed by selecting the
icon with the meter control
switches.
Some of the information may be dis-
played automatically depending on the
situation.
Changing the display
C
A
■ Caution for use while driving
For safety, avoid operating the meter
control switches while driving as
much as possible, and do not look
continuously at the multi-information
display while driving. Stop the vehicle
and operate the meter control
switches. Failure to do so may cause
a steering wheel operation error,
resulting in an unexpected accident.
Menu icons
B
C
D
To Next Page
Loading...
