Toyota RAV4 PHEV 2023 - Page 220

218
3-1. Instrument cluster
■ LTA (Lane Tracing Assist)
(if equipped) (P.353)
Select to set up the following items.
 “Lane Centre”
Select to enable/disable the lane
centering function.
 “Alert Options”
Select to change each notifica-
tion method of the lane departure
alert.
 “Sensitivity”
Select to set the lane departure
alert sensitivity.
 “Sway Warning”
Select to enable/disable the
vehicle sway warning.
 “Sway Sensitivity”
Select to set the vehicle sway
warning sensitivity.
■ BSM (Blind Spot Monitor)
(if equipped) (P.386)
Select to set up the following items.
 BSM (Blind Spot Monitor) on/off
Select to enable/disable the
BSM system.
 “Sensitivity”
Select to change the alert timing
for an approaching vehicle.
 “Brightness”
Select to switch the brightness of
the outside rear view mirror indi-
cators. (P.387)
■ PCS (Pre-Collision Sys-
tem) (if equipped)
Select to set up the following items.
 PCS on/off
Select to enable/disable the pre-
collision system.
 “Sensitivity”
Select to change the pre-colli-
sion warning timing.
■ Toyota parking assist-
sensor (P.395)
Select to set up the following items.
 Toyota parking assist-sensor
on/off
Select to enable/disable the
Toyota parking assist-sensor.
 “Volume”
Select to set the volume of the
buzzer which sounds when the
Toyota parking assist-sensor is
operated.
■ RCTA (Rear Cross Traffic
Alert) (if equipped) (P.386)
Select to set up the following items.
 RCTA (Rear Cross Traffic Alert)
on/off
Select to enable/disable the
RCTA system.
 “Volume”
Select to set the volume of the
buzzer which sounds when the
RCTA is operated.
■ PKSB (Parking Support
Brake System) (if equipped)
(P.403)
Select to enable/disable the Park-
ing Support Brake function.
OwnersManuals2.com