271
4
4-4. Adjusting the steering wheel and mirrors
Before driving
ror mode and the optical mirror
mode.
When using the digital mirror
mode
P.270
When using the optical mirror
mode
1 Press the menu button.
The icons will be displayed.
2 Press or to
enable (ON)/disable (OFF) the
automatic anti-glare function.
The icons will disappear if a button is
not operated for approximately 5 sec-
onds or more.
■ Adjusting the display (digital mirror
mode)
● If the displayed image is adjusted, it
may appear distorted. This is not a
malfunction.
● If the brightness of the Digital Rear-
view Mirror is set too high, it may
cause eye strain. Adjust the Digital
Rear-view Mirror to an appropriate
brightness. If your eyes become tired,
change to optical mirror mode.
● The brightness of the Digital Rear-
view Mirror will change automatically
according to the brightness of the
area in front of your vehicle.
■ To prevent the light sensors from
malfunctioning
To prevent the light sensors from mal-
functioning, do not touch or cover them.
Observe the following precautions.
Failure to do so may result in death or
serious injury.
■ While driving
● Do not adjust the position of the
Digital Rear-view Mirror or adjust
the display settings while driving.
Stop the vehicle and operate the
Digital Rear-view Mirror control
switches.
Failure to do so may cause a steer-
ing wheel operation error, resulting
in an unexpected accident.
● Always pay attention to the vehi-
cle’s surroundings.
The size of the vehicles and other
objects may look different when in
digital mirror mode and optical mirror
mode.
When backing up, make sure to
directly check the safety of the area
around your vehicle, especially
behind the vehicle.
Additionally, if a vehicle approaches
from the rear in the dark, such as at
night, the surrounding area may
appear dim.
To Next Page
Loading...
