EasyManua.ls Logo

Toyota RAV4 PHEV 2023 - Page 406

Toyota RAV4 PHEV 2023
718 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
404
5-5. Using the driving support systems
The Parking Support Brake can be
enabled/disabled on the screen
of the multi-information display. All
of the Parking Support Brake func-
tions (static objects and rear-cross-
ing vehicles) are enabled/disabled
simultaneously. (P.206, 217)
When the Parking Support Brake is dis-
abled, the PKSB OFF indicator
(P.184) illuminates on the multi-infor-
mation display.
To re-enable the system, select on
the multi-information display, select
and turn it on.
If the system is disabled, it will remain
off even if the power switch is turned to
ON after the power switch has been
turned off.
WARNING
When loading the vehicle onto a
boat, truck or other transport ves-
sel.
If the suspension has been modi-
fied or tires of a size other than
specified are installed.
If the front of the vehicle is raised or
lowered due to the carried load.
When equipment that may obstruct
a sensor is installed, such as a tow-
ing eyelet, bumper protector (an
additional trim strip, etc.), bicycle
carrier, or snow plow.
When using automatic car washing
devices.
If the vehicle cannot be driven in a
stable manner, such as when the
vehicle has been in an accident or
is malfunctioning.
When the vehicle is driven in a
sporty manner or off-road.
When the tires are not properly
inflated.
When the tires are very worn.
When tire chains, a compact spare
tire or an emergency tire puncture
repair kit are used.
When your vehicle is towing a
trailer or during emergency towing.
NOTICE
If “Parking Support Brake
Unavailable” is displayed on the
multi-information display and the
PKSB OFF indicator illuminates
If this message is displayed immedi-
ately after the power switch is
changed to ON, operate the vehicle
carefully, paying attention to your sur-
roundings. It may be necessary to
drive the vehicle for a certain amount
of time before the system returns to
normal. (If the system does not return
to normal after driving for a while,
clean the sensors and their surround-
ing area on the bumpers.)
Enabling/Disabling the Park-
ing Support Brake
OwnersManuals2.com

Table of Contents

Related product manuals