460
6-4. Using the other interior features
device and portable device will get
warmer, however this is not a mal-
function.
When a portable device gets warm
while charging, charging may stop
due to the protection function on the
portable device side. In this case,
when the temperature of the portable
device drops significantly, charge
again.
The fan may start operating to lower the
temperature inside the wireless charger,
however this is not a malfunction.
■ Operation sounds
A buzzing noise may be heard when
pressing the power supply switch to turn
the power supply on, when turning the
power switch to ACC or ON while the
wireless charger power supply is on, or
when detecting a portable device. How-
ever, this is not a malfunction.
■ If the smartphone OS has been
updated
If the smartphone OS has been updated
to a newer version, its charging specifi-
cations may have changed significantly.
For details, check the information on the
manufacturer’s website.
■ Trademark information
iPhone is a trademark of Apple Inc., reg-
istered in the U.S. and other countries.
■ Caution while driving
When charging a portable device, for
safety reasons, the driver should not
operate the main part of the portable
device while driving.
■ Caution while in motion
Do not charge lightweight devices
such as wireless headphones while in
motion. These devices are very light
and may be ejected from the charging
tray, which may lead to unforeseen
accidents.
■ Caution regarding interference
with electronic devices
People with implantable cardiac pace-
makers, cardiac resynchronization
therapy-pacemakers or implantable
cardioverters, as well as any other
electrical medical device, should con-
sult their physician about the usage of
the wireless charger.
■ To prevent malfunctions or
burns
Observe the following precautions.
Failure to do so may result in a equip-
ment failure and damage, catch fire,
burns due to overheat or electric
shock.
● Do not insert any metallic objects
between the charge area and the
portable device while charging
● Do not attach an aluminum sticker
or other metallic object to the
charge area
● Do not attach an aluminum sticker
or other metallic object to the side
of the portable device (or to its case
or cover) that touches the charge
area
● Do not use the charging tray as a
small storage space
● Do not subject to a strong force or
impact
● Do not disassemble, modify or
remove
● Do not charge devices other than
specified portable devices
● Keep away from magnetic items
● Do not charge devices if the charge
area is covered in dust
● Do not cover with a cloth or similar
material
To Next Page
Loading...
