505
7
7-3. Do-it-yourself maintenance
Maintenance and care
pletely removed with the air intake
vent cover installed, remove the
cover and clean the filter.
1 Turn the power switch off.
2 Using a Phillips screwdriver,
remove the clip.
3 Remove the air intake vent
cover.
Pull the cover as shown in the illustra-
tion to disengage the 8 claws, starting
from the claw in the upper right corner
and pull the cover toward the front of
the vehicle to remove it.
4 Remove the air intake vent filter.
Disengage the 4 center claws from the
filter.
Disengage the claws in the order of
and to remove the filter from the
cover.
5 Remove the dust and clogs from
the filter using a vacuum
cleaner, etc.
Make sure to also remove the dust and
clogs from the inside of the air intake
vent cover.
6 Reinstall the filter to the cover.
Engage the claws in the order of
A
To Next Page
Loading...
