519
7
7-3. Do-it-yourself maintenance
Maintenance and care
7 Reinstall the screws.
8 Reinstall the cover.
■ Back-up lights
1 Open the back door and remove
the cover.
To prevent damage to the cover, pro-
tect the tip of the screwdriver with a rag.
2 Turn the bulb base counter-
clockwise.
Remove the cord from the clip before
turning the bulb base.
3 Remove the light bulb.
4 Install a new light bulb.
5 Install the bulb base to the light
unit by inserting it and turning
the bulb base clockwise.
Secure the cord with the clip back again
To Next Page
Loading...
