540
8-2. Steps to take in an emergency
■ Inappropriate pedal operation warning light
*
(warning buzzer)
*
: This light illuminates on the multi-information display with a message.
■ Brake hold operated indicator (warning buzzer)
■ Parking brake indicator
Warning light Details/Actions
When a buzzer sounds:
Brake Override System is malfunctioning
Drive-Start Control is malfunctioning
Drive-Start Control is operating
Follow the instructions displayed on the multi-
information display.
When a buzzer does not sound:
Brake Override System is operating.
Release the accelerator pedal and depress the
brake pedal.
Warning light Details/Actions
(Flashes)
Indicates a malfunction in the brake hold system
Have the vehicle inspected by any authorized
Toyota retailer or Toyota authorized repairer,
or any reliable repairer immediately.
Warning light Details/Actions
(Flashes)
It is possible that the parking brake is not fully
engaged or released
Operate the parking brake switch once again.
This light comes on when the parking brake is not
released. If the light turns off after the parking brake
is fully released, the system is operating normally.
To Next Page
Loading...
