553
8
8-2. Steps to take in an emergency
When trouble arises
Therefore keep it in a safe place.
7 Connect the hose to the valve.
Screw the end of the hose clockwise as
far as possible.
8 Make sure that the compressor
switch is off.
9 Connect the power plug to the
power outlet socket. (P.453)
10Attach the sticker provided with
the tire puncture repair kit to a
position easily seen from the
driver’s seat.
11Check the specified tire inflation
pressure.
Tire inflation pressure is specified on
the label on the driver’s side pillar as
shown. (P.590)
12Start the hybrid system.
(P.310)
To Next Page
Loading...
