Toyota TM4875A - Page 34

Instruction
Form：DP5-005 Revised：05 32
Parameter write process
Parameter write mode
completion process
Parameter write mode
chancel process
Number of mode shift
transmission instructions
Inspection mode shift
instruction
80 times 1 time – 65535 times
Parameter write mode
shift instruction
Wireless cut down
timeout
Inspection mode 1000msec
100msec～65535msec
Parameter write mode
<TM4875B specifications>
In the United States and Canada, use of 2480 MHz and + 5 dBm is restricted to correspond to
FCC / IC.
If 2480 MHz is set, the wireless module automatically changes to 2479 MHz.
If a value greater than +4 dBm is set, the wireless module will automatically change to +4 dBm.
In other countries, there is no use restrictions on frequency and output.