52 TNS 510
DESTINATION SEARCH
(b) Selecting from the categories
Touch “Category”.
If the desired POI category is on the screen,
touch the name to display a detailed list of
the POI category.
If the desired POI category is not on the
screen, touch “List all categories” to list
all POI categories.
When the desired category is touched, the
POI name list or POI name input screen is
displayed.
— Destination search by
“POI near cursor”
The destination can be set by selecting the
search point and the POI category.
1. Push the “DEST” button.
2. Touch “POI near cursor” on the
“Destination” screen.
3. Set the search point by the following
method:
1. Input the town centre
2. Set the current position as the search
point
3. Set the search point via the map
screen
4. Set the search point from any
destination
It is possible to display the names of
POIs located within approximately 30 km
(20 miles) from the selected search point.
2E5032G
2E5033G
2E5035aG
2E5034G
01955_TNS 510_OM.indd 52 21/10/2008 16:17:00
To Next Page
Loading...
Need help?
General
