23
GB
Multifunctional Unit 5 in 1
cut off sensor that will prevent overheating
• Keep the fi lters clean. Under normal conditions, fi lters should
only need cleaning once every 2-3 weeks (approximately).
Since the fi lters remove airborne particles, more frequent
cleaning maybe necessary, depending on the air quality.
• For the initial start-up in air conditioning mode set the fan
speed to maximum and the thermostat to 3-4 degrees
lower than the current temperature. After, set the fan switch
to low and set the thermostat to your desired setting.
• To protect the unit we recommend not using the cooling
function when the ambient temperature > 35℃.
FEATURES AND PARTS LIST
1. FEATURES
• Part of Multifunctional Air Treatment Unit of Intelligent Air Conditioning products
• Compact, designer inspired model
• Cooling, Dehumidifying, Humidifying for all around the year use
• Improves comfort and indoor air quality
• Self-evaporative system in cooling mode - no need to empty external water tank
• Digital Control Panel with side vents to prevent dust and dirt entering the machine.
• Intelligent LCD screen, indicates temperature, humidity, operation mode
• Remote control that can be stored in slot at on the side of unit after use.
• The hot air outlet is positioned high on the unit – this allows for improved performance with
the use of a short hose
• On/Off timer function – allows you to choose when the unit operates both in air conditioning
and dehumidifying mode
• Advanced Compressor protection technology
• Recessed castors for improved portability
• Self-Diagnostic intelligent appliance
To Next Page
Loading...
