EasyManua.ls Logo

Toyotomi SmartCube - Sleep Mode; Child Lock

Toyotomi SmartCube
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
30
GB
Multifunctional Unit 5 in 1
Please change HEPA lters if necessary than press and hold SPEED button for 3 seconds to
reset the lter change counter.
Note: For improved air ow and performance we recommend to remove the HEPA lters in Air
Conditioner and Dehumidi er mode. Vacuum clean every week the HEPA lters and wash the
mesh lters every 2-3 weeks to improve their life.
SLEEP MODE
Select SLEEP button to activate
While in cooling mode, press the SLEEP to enter SLEEP mode. It will increase the setting with
1 after an hour and readjust to a 2 increase after 2 hours.
SWING
Press this key and the outlet will oscillating, and it will stop when this key is pressed again. The
outlet will close up automatically when the unit stops working.
ALARM When the water tank is full, E4 will be displayed on the LED panel. To resume operation,
please empty the tank if in Dehumidi er mode, or remove the rubber cap from drain hose, wait
for internal tank to empty than empty the main tank if in Air Conditioner mode. The E4 warning
will disappear after draining, and the unit can be restarted by pressing the Power On key. E8
error / air lter change indicator can be reset by pressing the FAN SPEED key on the control
panel for 3 seconds.
CHILD LOCK
Press keys on the control panel at the same time for three seconds and the unit will
enter child lock mode; control panel and functions cannot be operated until CHILD LOCK is
disabled. To resume normal operation please press again the same keys for 3 seconds.

Related product manuals