TP-Link AC600 User Manual

16
wireless router, please click “Setup Wizard”.
NOTE: If you can’t see the web management interface, and you’re
being prompted to input user name and password again, it means you
didn’t input username and password correctly. Please retype user
name and password again. If you’re certain about the user name and
password you type are correct, please go to ‘4-2 Troubleshooting’ to
perform a factory reset, to set the password back to default value.
TIP: This page shows the four major setting categories: Setup Wizard,
Advanced Setup, WPS Setup and Status. You can find the shortcut
which leads to these setting categories at the upper-right corner of
every page, and you can jump to another category directly by clicking
the link, and don’t have to go back to the first page.

TP-Link AC600 Specifications

General

Interface	USB 2.0
Antenna	Internal
Model	Archer T2U
Wireless Standard	IEEE 802.11ac
Frequency	2.4GHz, 5GHz
Security	WEP, WPA, WPA2
Data Rate	5 GHz: Up to 433 Mbps, 2.4 GHz: Up to 150 Mbps
Operating Systems Supported	Windows 11/10/8.1/8/7/XP, Mac OS X 10.9-10.13