73
Chapter 12
Manage the Router
2. Go to Advanced > System > Reboot.
3. Tick the
Enable box of Reboot Schedule.
4. Specify the Reboot Time when the router reboots and Repeat to decide how often it
reboots.
5. Click
SAVE.
12. 10. Control the LED
The LED of the router indicates its activities and status. You can enable the Night Mode
feature to specify a time period during which the LED is off.
1. Visit
http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to
Advanced > System > LED Control.
3. Enable
Night Mode.
To Next Page
Loading...
