50
Chapter 10
USB Settings
• Disk Drives: Displays the USB storage device(s) connected to the router.
• Partition: Displays the partition of a USB storage device.
• Total: Displays a USB storage device’s used/free memory by partition.
• Share: When enabled, you can access the corresponding partition.
• Modify: Click
to safely eject a USB storage device.
10. 1. 4. Customize the Access Settings
By default, all the network clients can access all folders on your USB disk. You can
customize your sharing settings by setting a sharing account, sharing specific contents
and setting a new sharing address on the router’s web management page.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to Advanced > USB > USB Storage Device.
• To Customize the Address of the USB Storage Device
You can customize the server name and use the name to access your USB storage
device.
1. In the Access Method session, make sure Samba for Windows Samba for macOS/
Linux is ticked, and enter a Network/Media Server Name as you like, such as
MyShare, then click SAVE .
To Next Page
Loading...
