44
Chapter 4
Configure the Router in Wireless Router Mode
1 ) Enter a Name for the profile to make it easier to identify.
2 ) Under Devices, click .
3 ) Select the devices that belong to this family member. Access restrictions will
be applied to these devices. Click ADD when finished.
Note: Only devices that have previously been connected to your router’s network are listed here. If
you are unable to find the device you want to add, connect it to your network and then try again.
4 ) Click NEXT.
5. Block content for this profile.
1 ) Enter the key word of the website that you want to block. Click if want to
block multiple websites.
2 ) Click NEXT.
6. Set time restrictions on internet access.
To Next Page
Loading...
