TP-Link C420 - Optimize Camera Placement for Detection

*Triggers may vary by product models and Tapo Care plans. More devices will be supported
soon.
Action List
Action (Then)
Run a Shortcut
You need to create a shortcuts first.
e.g. Then run “Arrive
Home” shortcut
Enable/Disable
Automation
You need to create an automation first.
e.g. Then run “Turn on
light” automation
Control Tapo
Devices
Smart Camera
Enable Privacy Mode
Disable Privacy Mode
Enable/Disable Privacy Mode
Turn On
Trigger (When)
Trigger
Manually
Shortcuts: With one tap
Trigger Time
At Sunrise
Offset（±5h59min）
e.g. When it is 7 pm
every Monday to Friday
At Sunset
Offset（±5h59min）
At Specific Time
00:00 ~ 23:59
Trigger Device
Smart Camera
(Vary by models)
Motion Detected
e.g. When your Tapo
Cam detects a motion
Person Detected
Baby Crying Detected
Area Intrusion Detected
Line Crossing Detected
Pet Detected
Camera Tampering Detected
...
Smart Wi-Fi
Switch
Single Tap
Smart Hub
Ring
Smart Button
Single Tap
Double Tap
Rotate Clockwise
Rotate Anticlockwise
Motion Sensor
Motion Triggered
Contact Sensor
Open
Close
Keep open for more than 1
minute
Temperature and
Humidity Sensor
Temperature above/below your
set one
Humidity above/below your
set one
Water Leak
Sensor
Water Leak Detected
Water Leak Solved