Do you have a question about the TP-Link CPE220 and is the answer not in the manual?
5 GHz | No |
---|---|
Bandwidth | 2.4 GHz |
Frequency band | 2.4 - 2.483 GHz |
Channel bandwidth | 40 MHz |
Channels quantity | 5 channels |
Networking standards | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
Maximum data transfer rate | 300 Mbit/s |
Management platform | Pharos Control |
Flash memory | 8 MB |
Internal memory | 64 MB |
Input current | 0.8 A |
Output current | 1 A |
Output voltage | 24 V |
AC input voltage | 100 - 240 V |
AC input frequency | 50 - 60 Hz |
Power consumption (max) | 10.8 W |
Security algorithms | 64-bit WEP, 128-bit WEP, 152-bit WEP, AES, HTTPS, SNMP, SSH, SSID, TKIP, WPA, WPA-PSK, WPA2, WPA2-PSK |
Number of SSID supported | 1 |
Service Set Identifier (SSID) features | SSID broadcast on/off |
Placement | - |
Certification | - CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark - RoHS, IPX5 |
Product color | White |
International Protection (IP) code | IPX5 |
USB 2.0 ports quantity | 0 |
Antenna features | Integrated antenna |
Antennas quantity | 2 |
Antenna gain level (max) | 12 dBi |
Storage temperature (T-T) | -40 - 70 °C |
Operating temperature (T-T) | -30 - 70 °C |
Storage relative humidity (H-H) | 5 - 95 % |
Operating relative humidity (H-H) | 10 - 90 % |
Depth | 57 mm |
---|---|
Width | 110 mm |
Height | 33.5 mm |