TP-Link EAP120 - Chapter 4 Management Mode; 4.1 Mode Identification

10
■
Via PSE Device
EAP220
TL-SG3424P
2
1
1. Connect the EAP and the PSE device through an Ethernet cable.
2. Press the ON/OFF button on the interface panel of the EAP.
■
Via Power Adapter
TL-SG2008
EAP220
Socket
Socket
1. Plug one end of the provided power adapter into the power port of the EAP,
and the other end to a standard electrical wall socket.
2. Press the ON/OFF button on the interface panel of the EAP.