09
4. Attach the EAP to the mounting bracket by aligning ARROW 1 with ARROW 2.
RESET
CONSOLE
ETHERNET
ON/OFF
POWER
ARROW 2
ARROW 1
5. Turn the EAP clockwise until it locks into place.
6. Hang the EAP on the screws. Make sure the EAP is firmly seated against the
wall.
7. Connect the Ethernet cable to the Ethernet port on the EAP.
4. Powering Mode
The EAP can be powered via a PSE device (e.g., a PoE switch) or its power adapter.
To Next Page
Loading...
