26
Chapter 7
TP-Link Cloud Service
the same AP as Users. All accounts can monitor and manage the AP locally or remotely,
but user accounts cannot:
• Reset the AP to its factory default settings either on the web management page or in
the Aginet app.
• Add/remove other TP-Link IDs to/from the AP.
7. 3. 1. Add TP-Link ID to Manage the AP
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID.
2. Go to
Basic > TP-Link Cloud, and focus on the Bound Accounts section.
3. Click
, enter another TP-Link ID as needed and click SAVE.
Note: If you need another TP-Link ID, please register a new one via the Aginet app. Refer to Manage the AP via the TP-
Link Aginet App to install the app and register a new TP-Link ID.
4. The new TP-Link ID will be displayed in the Bound Accounts table as a User.
7. 3. 2. Remove TP-Link ID(s) from Managing the AP
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID.
2. Go to
Basic > TP-Link Cloud, and focus on the Bound Accounts section.
3. Tick the checkbox(es) of the TP-Link ID(s) you want to remove and click
Unbind.
To Next Page
Loading...
