TP-Link M5250 - Page 13

M5250
3G Mobile Wi-Fi User Guide
-6-

Note:
It’s advised that you do not use M5250 until the battery has been installed.
When finishing the above two-step installation, you can press and hold the power button
for about 5 seconds to turn on M5250.
 Tips:
You are supported to charge the battery in three ways:
Method 1:
1) Connect one end of the USB cable to the micro USB port.
2) Connect the other end of the USB cable to the USB port of the power adapter.
3) Plug the power adapter to a standard wall socket.
Method 2:
1) Connect one end of the USB cable to the micro USB port.
2) Connect the other end of the USB cable to the USB port of your PC.
Method 3:
1) Connect one end of the USB cable to the micro USB port.
2) Connect the other end of the USB cable to the USB port of your power bank.