Note: images may differ from the actual products.
Hard Drive Installation
For first time installation, please prepare a 3.5-inch hard disk drive (HDD). It is recommended to use the HDD of
enterprise or surveillance level. Before installation, please disconnect the power from the network video recorder
(NVR).
1. Remove the fixing screws on the side and back panels to open the cover of the NVR.
2. Attach the 4 included HDD screws to your hard drive. Do not fasten.
3. Match the 4 screws on the HDD with the 4 holes on the NVR, and insert the HDD interface into the slot.
To Next Page
Loading...
