6
1.2 Connect Network Devices
To connect your EAPs to the local network, refer to the following topology.
EAP Bridge AP (Main AP) Bridge AP (Sub-A
Wireless Bridge
EAP
Management Clients
Router
1. Connect your router to the internet.
2. Connect your EAPs to the LAN ports of your router.
For a Bridge kit product, connect one EAP to your router. This EAP will work as the Main
AP. The other EAP(s) in the kit will automatically connect to the Main AP via wireless
bridge and work as the Sub-AP(s).
3. Connect your wireless clients such as phones, tablets and laptops to the WiFi of an
EAP. The default SSIDs are printed on the EAP.
Now you can surf the internet on your phones, tablets and laptops. If you cannot access
the internet, follow the FAQ to troubleshoot the problem.
To Next Page
Loading...
