Need help?Do you have a question about the TP-Link Omada EAP615 and is the answer not in the manual?
General| Frequency | 2.4 GHz and 5 GHz |
|---|---|
| PoE Support | 802.3af/at PoE |
| Operating Humidity | 10% to 90% non-condensing |
| Wireless Standards | IEEE 802.11ax/ac/n/g/b/a |
| Wi-Fi Speed | 5 GHz: 1201 Mbps (802.11ax), 2.4 GHz: 574 Mbps (802.11ax) |
| Ports | 1 x Gigabit Ethernet (RJ-45) |
| Antenna Type | Internal |
| Management | Omada SDN |
| Mounting | Ceiling/Wall Mount |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Security | WPA3, WPA2, WPA |
Details setting SSIDs, wireless modes, channel width, and transmit power for optimal performance.
Guides on creating SSIDs, setting security modes, and configuring advanced wireless options.
Describes configuring portal authentication for guest access and redirecting users.
Details assigning VLAN IDs to SSIDs to segment wireless network traffic.
Guides on allowing or denying network access based on client MAC addresses.
Details optimizing traffic throughput and performance for different data types.
Guides on configuring dynamic or static IP addresses for the EAP.
Guides on changing the EAP's login username and password for security.
Details settings for EAP discovery by Omada Cloud-Based and SDN Controllers.
Provides instructions for rebooting the EAP or restoring it to factory defaults.
Guides on saving current EAP settings to a file and restoring them.
Explains downloading and installing new firmware files to update the EAP.
To Next Page