TP-Link Omada SG5428X - Chapter 1 Introduction; Product Overview; Appearance

Omada L2+/Stackable Lite L3 Managed Switch
01Introduction
Chapter 1 Introduction
1.1 Product Overview
The Omada L2+/Stackable Lite L3 Managed Switch is designed for medium businesses. In addition to wire-
speed performance, they can provide abundant L2 and L2/L3 management features respectively. A variety
of service features and multiple powerful functions with high security are also available.
The EIA-standardized framework and smart configuration capacity can provide flexible solutions for a
variable scale of networks. For Lite L3 switches, Static Routing, RIP, and OSPF come with abundant Layer
3 routing protocols that support a scalable network. Physically stacking for built-in redundancy and
performance. ERPS supports rapid protection and recovery in a ring topology.
Both types of switches are embedded with powerful software features: ACL, 802.1x and Dynamic ARP
Inspection provide robust security strategies. QoS and IGMP snooping/filtering optimize voice and
video application. Link aggregation (LACP) increases aggregated bandwidth, optimizing the transport of
business critical data. SNMP, RMON, WEB and CLI Log-in bring abundant management policies.
The switches integrate multiple functions with excellent performance, and are friendly to manage, which
can fully meet the need of the users demanding higher networking performance.
SX3206HPP/SX3832MPP/SG3210XHP-M2/SG3218XP-M2/SG3428MP/SG3428XMP/SG3428XMPP/
SG3428XPP-M2/SG3452P/SG3452XP/SG3452XMPP/SG5428XMPP/SG5452XMPP is also a Power
Sourcing Equipment (PSE*). All the RJ45 ports* on the switch support Power over Ethernet (PoE*) function,
which can automatically detect and supply power to those powered devices (PDs*) complying with IEEE
802.3af, IEEE 802.3at and/or IEEE 802.3bt.
*For SG3218XP-M2, only port 1-8 supports the Power over Ethernet (PoE) function.
*PSE: a device (switch or hub for instance) that provides power through an Ethernet cable.
*PoE: This technology describes a system to transmit electrical power, along with data, to remote devices
over standard twisted-pair cable in an Ethernet.
*PD: a device powered by a PSE and thus consumes energy. Examples include powering network cameras,
wireless LAN access points, IP telephones, network hubs, embedded computers etc.
1.2 Appearance
■
Front Panel
(The gures are for demonstration only. They may dier from your actual products.)
The front panel of SX3206HPP is shown as the following figure.
LED
Console Port
(RJ45/USB)
10G RJ45 Port SFP+ Slot
The front panel of SX3008F is shown as the following figure.
LED Console Port
(RJ45/USB)
SFP+ Slot
The front panel of SX3016F is shown as the following figure.
LED
Console Port
(USB/RJ45)
1G
RJ45 Port
SFP+ Slot