TP-Link SafeStream TL-ER6020 - Page 142

-137-
Choose the menu User Group→User to load the configuration page. Click the <Batch> button to
enter the batch processing screen. Then continue with the following settings:
Settings:
Action: Add
Start IP Address: 192.168.0.30
End IP Address: 192.168.0.50
Prefix Username: User
Start No.: 1
Step: 1
Click the OK button to add the Users in bulk.
Figure 4-10 User Config - Batch
 View
Choose the menu User Group→View to load the configuration page. Add all the Users you just
created into the Group 1 and click the <Save> button to apply.
4.3.3.2 App Control
Choose the menu Firewall→App Control→Control Rules to load the configuration page. Check the
box before Enable Application Control and click <Save> to apply. Then continue with the following
settings:
Settings:
Object: Group
Group: group1