-55-
3.3.2.1 Setup
Choose the menu Advanced→Traffic Control→Setup to load the following page.
Figure 3-35 Configuration
The following items are displayed on this screen:
G
ime:
Enable Bandwidth
n:
With this option selected, the Bandwidth Control will take effect when the
bandwidth usage reaches the specified value.
D
Limited
Bandwidth:
lt Limit applies only for users that are not constrained by Bandwidth
Control Rules. These users share certain bandwidth with upper limit
configured here. Value 0 means all the remained bandwidth is available to
use.
eneral
Disable Bandwidth
Control:
Select this option to disable Bandwidth Control.
Enable Bandwidth
Control all the t
Select this option to enable Bandwidth Control all the time.
Control Whe
efault Limit
Defau
To Next Page
Loading...
