T4. How can I reset the password to the cable modem's web interface?
If you have changed the password and have forgotten it, you must restore the cable modem to the
factory defaults. This will reset the password back to admin.
Note:
For more details about Troubleshooting and Technical Support contact information, please log on
to our Technical Support Website: http://www.tp-link.com/en/support
Appendix C: Configure the PC
In this section, we’ll introduce how to install and configure the TCP/IP correctly in Windows 7. First
make sure your Ethernet Adapter is working, refer to the adapter’s manual if needed.
1. On the Windows taskbar, Right-click Network icon
, and select Open Network and
Sharing Center > Change adapter settings.
20
To Next Page
Loading...
